Εγχειρίδιο Camry CR 6007 Φούρνος

Εγχειρίδιο

4

18. Do not use the oven with the door open. Do not cover the machine during operation, nor

put any items.

19. Do not touch the hot surfaces of the oven (door, top or bottom wall and side

walls). Use protective gloves to remove or touch any hot parts.

20. During operation, door glass becomes extremely hot. It must not be heavily hit, or pour

cold water because of the risk of its crack.

21. The power cord can be installed over an oven, and should not touch or be near hot

surfaces. Do not place the oven under the electrical outlet.

22. Due to the high temperature keep special carefulness when removing tray or grate (or

other accessories approved for use in ovens) with baked dishes. Please be careful, when

removing the tray or hot oil or other hot liquids. Use dedicated accessories offered with the

oven or heat-resistant oven gloves.

23. Oversized food must not be inserted, as this may cause fire and damage the appliance.

24. Do not place any cardboard, paper, plastics and other flammable or easily melt objects in

the oven.

25. Do not store any other accessories in the appliance.

26. After cooking and before cleaning the machine, unplug the power cord from the outlet

and leave to cool. Wait a long period of time because the heated oven cools very slowly.

27. Clean the device after each use.

28. Do not use corrosive detergents such as emulsions, creams, pastes, etc. to clean the

casing. They can wipe off the graphic signs on the surface such as scales, marks, warning

signs etc.

29. Do not wash metal parts in the dishwasher, as the corrosive detergents used in these

devices cause darkening of the above parts. It is recommended to wash them by hand, using

traditional dishwashing liquids.

30. NEVER cover the device during operation or when it does not cool down completely.

31. Do not use metal scouring pads to clean. Broken metal pieces may come into contact

with electrical parts, creating a risk of electric shock.

DESCRIPTION:

1. Temperature adjustment knob 2. Heating mode selection knob / power button

3. Housing 4. Timer

5. Indicator lamp 6. Handle for opening glass door

7. Baking tray 8. Grill

9. Rotary spit axis 10. Tray removal handle

11. Spit removal handle 12. Spit jaws (2 pairs)

BEFORE SWITCHING ON

Before first use, remove all packaging components.

- Make sure the oven is placed on high-temperature resistant base

- Make sure there Is enough ventilation space around oven (minimum 10 cm on each side and 30 cm above the oven)

- Make sure the oven is dry

USING THE DEVICE

1. Set temperature adjustment knob (1) to the desired value.

2. Set the heating mode selection knob (2) in position:

- upper +fan - Both upper and lower - upper + rotary spit

- Both upper and lower + fan - Both rotary spit and fan

4. Set timer (4) to required baking time. A bell is rung upon reaching required baking time.

5. In order to switch the device off before the time has run out, rotate heating mode selection knob (2) knob to "OFF".

6. Always unplug the power cable from the power outlet after use.

USING ROTARY SPIT

1. Put one pair of jaws on the axis sharp side, then slide onto the axis.

2. Impale such prepared spit (9) into the center part of the product to be baked, stick the spit jaws (12) in the product.

3. Put in second pair of jaws according to point 1 and 2, and stick them from other side, "closing" the product on the spit axis.

4. Check that the fixed product is located centrally along spit axis.

5. Place the square end of the spit in the spit drive coupling on the right-hand side of oven heating chamber, and place sharp end in the

bearing on left-hand side.

6. Set temperature adjustment knob (1) to the desired value (for example 200°C)

7. Turn the oven on using heating mode selection knob(2),after setting the desired baking time,then the lamp(5) will illuminate.

8. After the baking time runs out, switch the oven off by rotating the heating mode selection knob (2) to "OFF". Always unplug the power

cable from the power outlet after use.

9. Before removing product baked on spit, wait a moment to allow the device to cool. Then grab the spit axis using spit removal handle (11).

First raise left side, and slide to the left, so that right axle end leaves the drive coupling. Then, carefully remove baked meal from the oven.

Βαθμολογία

Περισσότερα για αυτό το εγχειρίδιο

Κατανοούμε ότι είναι ωραίο να έχετε ένα χάρτινο εγχειρίδιο για το Camry CR 6007 Φούρνος σας. Μπορείτε πάντα να κατεβάσετε το εγχειρίδιο από τον ιστότοπό μας και να το εκτυπώσετε μόνοι σας. Εάν θέλετε να έχετε ένα πρωτότυπο εγχειρίδιο, σας συνιστούμε να επικοινωνήσετε με το Camry. Μπορεί να είναι σε θέση να παρέχουν ένα πρωτότυπο εγχειρίδιο. Αναζητάτε το εγχειρίδιο του Camry CR 6007 Φούρνος σας σε διαφορετική γλώσσα; Επιλέξτε τη γλώσσα που προτιμάτε στην αρχική μας σελίδα και αναζητήστε τον αριθμό μοντέλου για να δείτε αν τον έχουμε διαθέσιμο.

Προδιαγραφές

Όλα τα εγχειρίδια για Camry Φούρνοι
Περισσότερα εγχειρίδια του Φούρνοι

Συχνές ερωτήσεις σχετικά με Camry CR 6007 Φούρνος

Η ομάδα υποστήριξής μας αναζητά χρήσιμες πληροφορίες προϊόντος και απαντήσεις σε συχνές ερωτήσεις. Εάν εντοπίσετε ανακρίβεια στις συνήθεις ερωτήσεις μας, ενημερώστε μας χρησιμοποιώντας τη φόρμα επικοινωνίας.

Σχετικά προϊόντα

Εγχειρίδιο

Camry CR 6016 Φούρνος

Εγχειρίδιο

Camry CR 6008 Φούρνος

Εγχειρίδιο

Camry CR 6017 Φούρνος

Εγχειρίδιο

Camry CR 6018 Φούρνος

Εγχειρίδιο

Miele H 6401 BMX Φούρνος

Εγχειρίδιο

Miele H 2561 BP Φούρνος

Εγχειρίδιο

Miele H 5461 BP Φούρνος

Εγχειρίδιο

Miele H 2861 B Φούρνος

Σχετικές κατηγορίες