Εγχειρίδιο Black and Decker KS603E Σέγα

Χρειάζεστε ένα εγχειρίδιο για το Black and Decker KS603E Σέγα σας; Παρακάτω μπορείτε να δείτε και να κατεβάσετε το εγχειρίδιο PDF δωρεάν στα Αγγλικά. Αυτό το προϊόν έχει αυτήν τη στιγμή 4 συχνές ερωτήσεις, 0 σχόλια και 0 ψήφους. Εάν αυτό δεν είναι το εγχειρίδιο που θέλετε, επικοινωνήστε μαζί μας.

Είναι ελαττωματικό το προϊόν σας και το εγχειρίδιο δεν προσφέρει λύση; Πηγαίνετε σε ένα Repair Café για δωρεάν υπηρεσίες επισκευής.

Εγχειρίδιο

Loading…

7
ENGLISH
Warning! The vibration emission value during actual use of
the power tool can differ from the declared value depending
on the ways in which the tool is used. The vibration level may
increase above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time.
Labels on tool
The following pictograms are shown on the tool:
:
Warning! To reduce the risk of injury, the user must
read the instruction manual.
Electrical safety
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Features
This tool includes some or all of the following features:
1. On/off switch
2. Lock-on button
3. Dust extraction outlet
4. Shoe plate
5. Saw blade support roller
Fig. E
6. Saw blade storage compartment (KS602E & KS603E)
Assembly
Warning! Before attempting any of the following operations,
make sure that the tool is switched off and unplugged and that
the saw blade has stopped. Used saw blades may be hot.
Adjustingthesawbladesupportroller(g.A&B)
u Loosen the two screws (8).
u Push the blade support roller (5) forward until it touches
the back edge of the saw blade (7).
u Tighten the two screws (8).
Fittingandremovingthesawblade(g.C)
u Before tting or removing the saw blade (7) the saw blade
support roller (5) must be adjusted to the rear position so
that it does not contact the blade.
u Loosen (do not remove) the two screws (10).
u Hold the saw blade (7) with the teeth facing forward.
u Insert the shank of the saw blade (7) into the blade holder
(9) as far as it will go.
u Slightly tighten the two screws (10) alternately to position
the blade, then fully tighten the two screws (10).
u Adjust the saw blade support roller (5) as described above.
u To remove the saw blade (7), turn both screws (10) one
turn counter-clockwise.
Connectingavacuumcleanertothetool(g.D)
An adaptor (11) is required to connect a vacuum cleaner or
dust extractor to the tool. The adaptor can be purchased from
your local Black & Decker retailer.
u Push the adaptor (11) into the dust extraction outlet (3).
u Connect the vacuum cleaner hose (12) to the adaptor (11).
Sawbladestorage(KS602E&KS603Eonly)(g.E)
Saw blades (7) can be stored in the storage compartment (6)
located on the side of the tool
u Open the cover of the saw blade storage compartment (6)
by holding the tab on the top of the door and pulling outwards.
u Remove or store saw blades (7) in the storage
compartment (6).
u Close the cover of the saw blade storage compartment (6)
and make sure that it is latched closed.
Cutlineblower(g.F)
u To aid visibility when cutting, your jigsaw is equipped with
a cut line blower (13) which will keep the work area clear
of dust as you saw.
Use
Adjustingtheshoeplateforbevelcuts(g.G)
The shoe plate can be set to make either a straight cut or a
left or right bevel cut at an angle of 45°.
u Loosen the screws (8).
u Pull the shoe plate (4) forward, rotate the shoe plate (4) to
the left or right and push it back into the 45° location.
u Push the blade support roller (5) forward until it touches
the saw blade (7).
u Tighten the screws (8).
To reset the shoe plate for straight cuts:
u Loosen the screws (8).
u Pull the shoe plate (4) forward, rotate to the centre and
push it back into the 0° location.
u Push the blade support roller (5) forward until it touches
the saw blade (7).
Λήψη εγχειριδίου στα ελληνικά (PDF, 1.2 MB)
(Σκεφτείτε το περιβάλλον και εκτυπώστε αυτό το εγχειρίδιο μόνο εάν είναι πραγματικά απαραίτητο)

Loading…

Βαθμολογία

Πείτε μας τη γνώμη σας για το Black and Decker KS603E Σέγα βαθμολογώντας ένα προϊόν. Θέλετε να μοιραστείτε τις εμπειρίες σας με αυτό το προϊόν ή να θέσετε μια ερώτηση; Αφήστε ένα σχόλιο στο κάτω μέρος της σελίδας.
Είστε ικανοποιημένοι με το Black and Decker KS603E Σέγα?
Ναι Όχι
Γίνε ο πρώτος που θα βαθμολογήσει αυτό το προϊόν
0 ψήφοι

Λάβετε μέρος στη συζήτηση σχετικά με αυτό το προϊόν

Εδώ μπορείτε να μοιραστείτε τη γνώμη σας για το Black and Decker KS603E Σέγα. Εάν έχετε κάποια ερώτηση, διαβάστε πρώτα προσεκτικά το εγχειρίδιο. Το να ζητήσετε ένα εγχειρίδιο μπορεί να γίνει χρησιμοποιώντας τη φόρμα επικοινωνίας μας.

Περισσότερα για αυτό το εγχειρίδιο

Κατανοούμε ότι είναι ωραίο να έχετε ένα χάρτινο εγχειρίδιο για το Black and Decker KS603E Σέγα σας. Μπορείτε πάντα να κατεβάσετε το εγχειρίδιο από τον ιστότοπό μας και να το εκτυπώσετε μόνοι σας. Εάν θέλετε να έχετε ένα πρωτότυπο εγχειρίδιο, σας συνιστούμε να επικοινωνήσετε με το Black and Decker. Μπορεί να είναι σε θέση να παρέχουν ένα πρωτότυπο εγχειρίδιο. Αναζητάτε το εγχειρίδιο του Black and Decker KS603E Σέγα σας σε διαφορετική γλώσσα; Επιλέξτε τη γλώσσα που προτιμάτε στην αρχική μας σελίδα και αναζητήστε τον αριθμό μοντέλου για να δείτε αν τον έχουμε διαθέσιμο.

Προδιαγραφές

Μάρκα Black and Decker
Μοντέλο KS603E
Κατηγορία Σέγες
Τύπος αρχείου PDF
Μέγεθος αρχείου 1.2 MB

Όλα τα εγχειρίδια για Black and Decker Σέγες
Περισσότερα εγχειρίδια του Σέγες

Συχνές ερωτήσεις σχετικά με Black and Decker KS603E Σέγα

Η ομάδα υποστήριξής μας αναζητά χρήσιμες πληροφορίες προϊόντος και απαντήσεις σε συχνές ερωτήσεις. Εάν εντοπίσετε ανακρίβεια στις συνήθεις ερωτήσεις μας, ενημερώστε μας χρησιμοποιώντας τη φόρμα επικοινωνίας.

Σε ποια υλικά μπορώ να χρησιμοποιήσω τη σέγα μου; Επαληθεύτηκε

Λόγω των εναλλάξιμων λεπίδων, οι σέγες μπορούν να χρησιμοποιηθούν σε σχεδόν όλα τα υλικά. Οι σέγες χρησιμοποιούνται κυρίως για το πριόνισμα καμπύλων και γωνιών.

Αυτό ήταν χρήσιμο (483) Διαβάστε περισσότερα

Πρέπει να φοράω προστασία ματιών όταν χρησιμοποιώ παζλ; Επαληθεύτηκε

Ναί. Τα μικρά σωματίδια μπορούν να πετάξουν κατά τη διάρκεια του πριονίσματος. Όταν αυτά χτυπήσουν ένα μάτι, μπορούν να προκαλέσουν μόνιμη βλάβη στα μάτια. Γι 'αυτό είναι πάντα απαραίτητο να φοράτε προστασία των ματιών.

Αυτό ήταν χρήσιμο (247) Διαβάστε περισσότερα

Μπορώ να αποθηκεύσω ηλεκτρικά εργαλεία σε υπόστεγο ή γκαράζ; Επαληθεύτηκε

Γενικά, μπορείτε να αποθηκεύσετε ηλεκτρικά εργαλεία σε ένα υπόστεγο ή γκαράζ, ακόμα κι αν μερικές φορές παγώνει εκεί. Ωστόσο, είναι καλύτερο για τη διάρκεια ζωής του ηλεκτρικού εργαλείου να το αποθηκεύετε σε ξηρό μέρος χωρίς μεγάλες διακυμάνσεις θερμοκρασίας. Σε ένα υπόστεγο ή γκαράζ, οι διαφορές στη θερμοκρασία μπορεί να προκαλέσουν τη δημιουργία συμπύκνωσης, η οποία μπορεί να προκαλέσει σκουριά. Επιπλέον, τα εργαλεία που λειτουργούν με μπαταρίες διαρκούν λιγότερο και δεν φορτίζουν το ίδιο καλά σε πολύ χαμηλές θερμοκρασίες. Για να είστε σίγουροι πώς πρέπει να αποθηκεύεται το ηλεκτρικό εργαλείο σας, διαβάζετε πάντα προσεκτικά το εγχειρίδιο χρήσης.

Αυτό ήταν χρήσιμο (90) Διαβάστε περισσότερα

Χρειάζεται να φοράω προστασία ακοής όταν χρησιμοποιώ παζλ; Επαληθεύτηκε

Ναι θα έπρεπε. Παρόλο που η ποσότητα θορύβου που παράγεται από ένα παζλ μπορεί να ποικίλει μεταξύ των εμπορικών σημάτων και των μοντέλων, η μακροπρόθεσμη έκθεση σε δυνατό θόρυβο μπορεί να προκαλέσει μόνιμη ζημιά στην ακοή. Γι' αυτό είναι καλή ιδέα να φοράτε προστατευτικά ακοής.

Αυτό ήταν χρήσιμο (81) Διαβάστε περισσότερα
Εγχειρίδιο Black and Decker KS603E Σέγα

Σχετικά προϊόντα

Σχετικές κατηγορίες

×
Download