Εγχειρίδιο Tefal FV9540E0 Ultimate Σίδερο

Εγχειρίδιο

8

4. For more steam (shot of steam button)

- Press the Shot of Steam button from time to time

- fig. 9.

- Wait a few seconds between each shot before pressing the button again.

5. Vertical steam ironing

- Ideal for removing creases from suits, jackets, skirts, hanging curtains etc

- Hang the garment on a hanger and hold the fabric slightly taut with one hand. The steam is very hot, so you should always

d

o this with the garment on a hanger – never while someone is wearing it.

-

Set your thermostat to MAX

- fig. 10.

- Press the Shot of Steam button ( ) repeatedly

- fig. 9

moving the iron from top to bottom

- fig. 11.

- Hold the iron a few centimetres from the fabric to avoid burning delicate fabrics.

6. Anti-Calc Plus System

- You iron is equipped with an integral anti-scale system

- fig. 12.

- This system will help to provide :

• a better ironing quality with a constant flow of steam,

• a longer life for your iron.

7. Anti-drip function

- Autosteam Control, i.e. the automatic selection of the ironing programme depending on the fabrics selected, makes it

possible to reduce steam flow at low temperatures and prevents your iron from dripping water onto your linen.

8. Auto-Stop safety feature (depending on model)

- For your safety, the electronic system cuts off the power and the autostop indicator light

flashes

- fig. 13

when:

• The iron remains motionless for more than 8 minutes on its heel.

• The iron remains flat or on its side for more than 30 seconds.

- To restart the iron, just move it gently until the warning light stops flashing.

9.

Gliss/Glide Protect

TM

autoclean - Autoclean Catalys soleplate

(depending on model)

• Your iron is equipped with a catalytic self-cleaning soleplate.

• Its exclusive coating removes all impurities generated by normal use.

• It is recommended that you always rest your iron on its support base to preserve its self-cleaning coating.

Dry Ironing

- Choose your ironing program.

- Set the steam control to DRY

- fig. 1.1.

- You may start ironing when the thermostat light goes out.

Caring for your iron

BE CAREFUL ! Unplug your iron and let it cool down before cleaning it.

Cleaning the anti-calc valve (once per month)

- Unplug your iron and empty the water tank.

- To remove the antiscale valve, set your thermostat on the position MAX

- fig. 10

,

place the steam control on STEAM,

- fig. 1.2

and the valve can now be removed

from your iron

- fig. 15.

Never touch the end of the valve

- Soak the valve in a cup of white vinegar or plain lemon juice for 4 hours

- fig. 16

.

- Rinse the valve under running water.

- Replace the anti-calc valve.

The iron will not function without the anti-calc valve

1. Self-cleaning

In order to extend the life of your iron, use the Self-Cleaning function once a month.

- Set the iron to DRY

- fig. 1.1

.

- Fill the water tank to maximum.

- Set the iron on his heel, with the water tank full, and set the thermostat to MAX

- fig. 10.

- When the thermostat light goes out, unplug the iron and hold it in a horizontal position, over a sink.

- Set the steam control to STEAM ,

- fig. 1.2

- Remove the anti-calc valve.

- Shake the iron gently, over the sink, until some of the water in the water tank (with the impurities) has flowed out through the

soleplate.

- At the end of the operation, push the anti-calc valve back into position.

- Turn the iron back on for 2 minutes, setting it on its heel, to dry the soleplate.

- Unplug the iron, and when the soleplate is just warm, wipe it with a soft cloth.

2. Cleaning the soleplate

Your iron has a self-clean soleplate (according to the model):

• Ensure that the fabric you are

ironing is flat to avoid steam

v

enting sideways whilst ironing.

Warning ! the steam control must be

set to STEAM (fig.1.2) during the

cleaning phase and the thermostat

must be set to MAX (fig.10).

When the Auto-Stop

warning light is on, it is

normal for the thermostat

light to remain off.

Recommendations: the

self-cleaning function

helps to slow down the

scaling up of your iron.

1800135516 FV95XX E2_110x154 26/01/15 14:45 Page8

Βαθμολογία

Περισσότερα για αυτό το εγχειρίδιο

Κατανοούμε ότι είναι ωραίο να έχετε ένα χάρτινο εγχειρίδιο για το Tefal FV9540E0 Ultimate Σίδερο σας. Μπορείτε πάντα να κατεβάσετε το εγχειρίδιο από τον ιστότοπό μας και να το εκτυπώσετε μόνοι σας. Εάν θέλετε να έχετε ένα πρωτότυπο εγχειρίδιο, σας συνιστούμε να επικοινωνήσετε με το Tefal. Μπορεί να είναι σε θέση να παρέχουν ένα πρωτότυπο εγχειρίδιο. Αναζητάτε το εγχειρίδιο του Tefal FV9540E0 Ultimate Σίδερο σας σε διαφορετική γλώσσα; Επιλέξτε τη γλώσσα που προτιμάτε στην αρχική μας σελίδα και αναζητήστε τον αριθμό μοντέλου για να δείτε αν τον έχουμε διαθέσιμο.

Προδιαγραφές

Όλα τα εγχειρίδια για Tefal Σίδερα
Περισσότερα εγχειρίδια του Σίδερα

Συχνές ερωτήσεις σχετικά με Tefal FV9540E0 Ultimate Σίδερο

Η ομάδα υποστήριξής μας αναζητά χρήσιμες πληροφορίες προϊόντος και απαντήσεις σε συχνές ερωτήσεις. Εάν εντοπίσετε ανακρίβεια στις συνήθεις ερωτήσεις μας, ενημερώστε μας χρησιμοποιώντας τη φόρμα επικοινωνίας.

Σχετικά προϊόντα

Εγχειρίδιο

Tefal FV6833E0 Σίδερο

Εγχειρίδιο

Tefal FV5781G0 Σίδερο

Εγχειρίδιο

Tefal GV9820E0 Σίδερο

Εγχειρίδιο

Tefal FV5840Z0 Σίδερο

Εγχειρίδιο

Tefal FV1953T0 Easy Steam Σίδερο

Εγχειρίδιο

Tefal GV9820G0 Σίδερο

Εγχειρίδιο

Tefal FV2831M0 Σίδερο

Εγχειρίδιο

Tefal FV9849S0 Ultimate Pure Σίδερο

Σχετικές κατηγορίες