Εγχειρίδιο Rapid ESN114 Tacker

Χρειάζεστε ένα εγχειρίδιο για το Rapid ESN114 Tacker σας; Παρακάτω μπορείτε να δείτε και να κατεβάσετε το εγχειρίδιο PDF δωρεάν στα Αγγλικά. Αυτό το προϊόν έχει αυτήν τη στιγμή 1 συχνή ερώτηση, 1 σχόλιο και έχει 1 ψήφο με μέση βαθμολογία προϊόντος 100/100. Εάν αυτό δεν είναι το εγχειρίδιο που θέλετε, επικοινωνήστε μαζί μας.

Είναι ελαττωματικό το προϊόν σας και το εγχειρίδιο δεν προσφέρει λύση; Πηγαίνετε σε ένα Repair Café για δωρεάν υπηρεσίες επισκευής.

Εγχειρίδιο

Loading…

5
ELECTRIC TACKER
Original instructions
GENERAL POWER TOOLS SAFETY WARNINGS
WARNING!! Read all safety warnings and
all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
personal injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) WORK AREA SAFETY
a) Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrup-
ter protected supply. Use of a ground fault circuit
interrupter reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the influence of drugs, alcohol or
medication. A moment of inattention while operating
power tools may result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energizing power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the rate
for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of child-
ren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
Λήψη εγχειριδίου στα ελληνικά (PDF, 8.42 MB)
(Σκεφτείτε το περιβάλλον και εκτυπώστε αυτό το εγχειρίδιο μόνο εάν είναι πραγματικά απαραίτητο)

Loading…

Βαθμολογία

Πείτε μας τη γνώμη σας για το Rapid ESN114 Tacker βαθμολογώντας ένα προϊόν. Θέλετε να μοιραστείτε τις εμπειρίες σας με αυτό το προϊόν ή να θέσετε μια ερώτηση; Αφήστε ένα σχόλιο στο κάτω μέρος της σελίδας.
Είστε ικανοποιημένοι με το Rapid ESN114 Tacker?
Ναι Όχι
100%
0%
1 ψήφος

Λάβετε μέρος στη συζήτηση σχετικά με αυτό το προϊόν

Εδώ μπορείτε να μοιραστείτε τη γνώμη σας για το Rapid ESN114 Tacker. Εάν έχετε κάποια ερώτηση, διαβάστε πρώτα προσεκτικά το εγχειρίδιο. Το να ζητήσετε ένα εγχειρίδιο μπορεί να γίνει χρησιμοποιώντας τη φόρμα επικοινωνίας μας.

JEAN PIERRE GRANDJEAN 14-10-2022
Γεια σας, αποσυναρμολόγησα αυτό το συρραπτικό μετά από απόφραξη.Ψάχνω για εκρηκτική όψη γιατί δεν ξέρω πώς να ξανασυναρμολογήσω 2 κομμάτια μετάλλου από την κεφαλή στο επίπεδο της διόδου των συνδετήρων.Ευχαριστώ

απάντηση | Αυτό ήταν χρήσιμο (0) (Μεταφράστηκε από την Google)

Περισσότερα για αυτό το εγχειρίδιο

Κατανοούμε ότι είναι ωραίο να έχετε ένα χάρτινο εγχειρίδιο για το Rapid ESN114 Tacker σας. Μπορείτε πάντα να κατεβάσετε το εγχειρίδιο από τον ιστότοπό μας και να το εκτυπώσετε μόνοι σας. Εάν θέλετε να έχετε ένα πρωτότυπο εγχειρίδιο, σας συνιστούμε να επικοινωνήσετε με το Rapid. Μπορεί να είναι σε θέση να παρέχουν ένα πρωτότυπο εγχειρίδιο. Αναζητάτε το εγχειρίδιο του Rapid ESN114 Tacker σας σε διαφορετική γλώσσα; Επιλέξτε τη γλώσσα που προτιμάτε στην αρχική μας σελίδα και αναζητήστε τον αριθμό μοντέλου για να δείτε αν τον έχουμε διαθέσιμο.

Προδιαγραφές

Μάρκα Rapid
Μοντέλο ESN114
Κατηγορία Tackers
Τύπος αρχείου PDF
Μέγεθος αρχείου 8.42 MB

Όλα τα εγχειρίδια για Rapid Tackers
Περισσότερα εγχειρίδια του Tackers

Συχνές ερωτήσεις σχετικά με Rapid ESN114 Tacker

Η ομάδα υποστήριξής μας αναζητά χρήσιμες πληροφορίες προϊόντος και απαντήσεις σε συχνές ερωτήσεις. Εάν εντοπίσετε ανακρίβεια στις συνήθεις ερωτήσεις μας, ενημερώστε μας χρησιμοποιώντας τη φόρμα επικοινωνίας.

Μπορώ να αποθηκεύσω ηλεκτρικά εργαλεία σε υπόστεγο ή γκαράζ; Επαληθεύτηκε

Γενικά, μπορείτε να αποθηκεύσετε ηλεκτρικά εργαλεία σε ένα υπόστεγο ή γκαράζ, ακόμα κι αν μερικές φορές παγώνει εκεί. Ωστόσο, είναι καλύτερο για τη διάρκεια ζωής του ηλεκτρικού εργαλείου να το αποθηκεύετε σε ξηρό μέρος χωρίς μεγάλες διακυμάνσεις θερμοκρασίας. Σε ένα υπόστεγο ή γκαράζ, οι διαφορές στη θερμοκρασία μπορεί να προκαλέσουν τη δημιουργία συμπύκνωσης, η οποία μπορεί να προκαλέσει σκουριά. Επιπλέον, τα εργαλεία που λειτουργούν με μπαταρίες διαρκούν λιγότερο και δεν φορτίζουν το ίδιο καλά σε πολύ χαμηλές θερμοκρασίες. Για να είστε σίγουροι πώς πρέπει να αποθηκεύεται το ηλεκτρικό εργαλείο σας, διαβάζετε πάντα προσεκτικά το εγχειρίδιο χρήσης.

Αυτό ήταν χρήσιμο (16) Διαβάστε περισσότερα
Εγχειρίδιο Rapid ESN114 Tacker

Σχετικά προϊόντα

Σχετικές κατηγορίες