Εγχειρίδιο Makita ER2550LH Χλοοκοπτικό

Εγχειρίδιο

4

Start the Petrol String Trimmer only in accordance with the instructions. –

Do not use any other methods for starting the engine! –

Use the Petrol String Trimmer and the tools only for such applications as –

specified.

Only start the engine, after the entire assembly is done. Operation of the –

device is only permitted after all the appropriate accessories are attached!

Before starting make sure that the cutting attachment has no contact with –

hard objects such as branches, stones etc. as the cutting attachment will

revolve when starting.

The engine is to be switched off immediately in case of any engine problems. –

Should the cutting attachment hit stones or other hard objects, immediately –

switch off the engine and inspect the cutting attachment.

Inspect the cutting attachment at short regular intervals for damage (detection –

of hairline cracks by means of tapping-noise test).

If the equipment gets heavy impact or fall, check the condition before –

continuing work. Check the fuel system for fuel leakage and the controls

and safety devices for malfunction. If there is any damage or doubt, ask our

authorized service center for the inspection and repair.

During operation always hold the Petrol String Trimmer with both hands. –

Never hold the Petrol String Trimmer with one hand during use.

Always ensure a safe footing.

Operate the equipment in such a manner as to avoid inhalation of the exhaust –

gases. Never run the engine in enclosed rooms (risk of gas poisoning).

Carbon monoxide is an odorless gas.

Switch off the engine when resting and when leaving the equipment –

unattended, and place it in a safe location to prevent danger to others or

damage to the machine.

Never put the hot Petrol String Trimmer onto dry grass or onto any –

combustible materials.

Always install the approved cutting attachment guard onto the equipment –

before starting the engine. Otherwise contact with the cutting attachment may

cause serious injury.

All protective installations and guards supplied with the machine must be –

used during operation.

Never operate the engine with faulty exhaust muffler. –

Shut off the engine during transport. –

Ensure safe position of the equipment during car transportation to avoid fuel –

leakage.

When transporting, ensure that the fuel tank is completely empty. –

When unloading the equipment from the truck, never drop the Engine to the –

ground or this may severely damage the fuel tank.

Except in case of emergency, never drop or cast the equipment to the ground –

or this may severely damage the equipment.

Remember to lift the entire equipment from the ground when moving the –

equipment. Dragging the fuel tank is highly dangerous and will cause damage

and leakage of fuel, possibly causing fire.

Refueling

Shut off the engine during refueling, keep away from open flames and do not –

smoke.

Avoid skin contact with mineral oil products. Do not inhale fuel vapor. Always –

wear protective gloves during refueling. Change and clean protective clothing

at regular intervals.

Take care not to spill either fuel or oil in order to prevent soil contamination –

(environmental protection). Clean the Petrol String Trimmer immediately after

fuel has been spilt.

Avoid any fuel contact with your clothing. Change your clothing instantly if –

fuel has been spilt on it (to prevent clothing catching fire).

Inspect the fuel cap at regular intervals making sure that it can be securely –

fastened and does not leak.

Carefully tighten the fuel tank cap. Change location to start the engine (at –

least 3 meters away from the place of refueling).

Never refuel in closed rooms. Fuel vapors accumulate at ground lever (risk of –

explosions).

Only transport and store fuel in approved containers. Make sure the fuel –

stored is not accessible to children.

Resting•

Transport•

Refueling•

Maintenance•

Tool replacement•

3 meters

Βαθμολογία

Περισσότερα για αυτό το εγχειρίδιο

Κατανοούμε ότι είναι ωραίο να έχετε ένα χάρτινο εγχειρίδιο για το Makita ER2550LH Χλοοκοπτικό σας. Μπορείτε πάντα να κατεβάσετε το εγχειρίδιο από τον ιστότοπό μας και να το εκτυπώσετε μόνοι σας. Εάν θέλετε να έχετε ένα πρωτότυπο εγχειρίδιο, σας συνιστούμε να επικοινωνήσετε με το Makita. Μπορεί να είναι σε θέση να παρέχουν ένα πρωτότυπο εγχειρίδιο. Αναζητάτε το εγχειρίδιο του Makita ER2550LH Χλοοκοπτικό σας σε διαφορετική γλώσσα; Επιλέξτε τη γλώσσα που προτιμάτε στην αρχική μας σελίδα και αναζητήστε τον αριθμό μοντέλου για να δείτε αν τον έχουμε διαθέσιμο.

Προδιαγραφές

Όλα τα εγχειρίδια για Makita Χλοοκοπτικά
Περισσότερα εγχειρίδια του Χλοοκοπτικά

Σχετικά προϊόντα

Εγχειρίδιο

Makita BBC300LD Χλοοκοπτικό

Εγχειρίδιο

Makita DUR362L Χλοοκοπτικό

Εγχειρίδιο

Makita DBC260L Χλοοκοπτικό

Εγχειρίδιο

Makita DUR365UZ Χλοοκοπτικό

Εγχειρίδιο

Makita EM3400L Χλοοκοπτικό

Εγχειρίδιο

Makita DUR361UZ Χλοοκοπτικό

Εγχειρίδιο

Makita DUR182L Χλοοκοπτικό

Εγχειρίδιο

Makita DUR191L Χλοοκοπτικό

Σχετικές κατηγορίες