Εγχειρίδιο First Austria FA-5647-1 Ατμοσίδερο

Χρειάζεστε ένα εγχειρίδιο για το First Austria FA-5647-1 Ατμοσίδερο σας; Παρακάτω μπορείτε να δείτε και να κατεβάσετε το εγχειρίδιο PDF δωρεάν στα Αγγλικά. Αυτό το προϊόν έχει αυτήν τη στιγμή 0 συχνές ερωτήσεις, 0 σχόλια και 0 ψήφους. Εάν αυτό δεν είναι το εγχειρίδιο που θέλετε, επικοινωνήστε μαζί μας.

Είναι ελαττωματικό το προϊόν σας και το εγχειρίδιο δεν προσφέρει λύση; Πηγαίνετε σε ένα Repair Café για δωρεάν υπηρεσίες επισκευής.

Εγχειρίδιο

Loading…

2 3
INSTRUCTIONS
STEAM BRUSH
IMPORTANT SAFETY INSTRUCTIONS
When using your steam brush, basic safety
precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
Use steam brush only for its intended use.
To protect against a risk of electric shock,
do not immerse the steam brush in water or
other liquids.
The steam brush should always be turned
to ‘O before plugging or unplugging
from outlet. Never yank cord to disconnect
from outlet; instead, grasp plug and pull to
disconnect.
Do not allow cord to touch hot surfaces. Let
steam brush cool completely before putting
away. Loop cord loosely around steam brush
when storing.
Always disconnect steam brush from
electrical outlet when lling with water or
emptying and when not in use.
Do not operate steam brush with a damaged
cord or if the steam brush has been dropped
or damaged. To avoid the risk of electric
shock, do not disassemble the steam
brush. Take it to a qualied serviceman for
examination and repair. Incorrect reassembly
can cause a risk of electric shock when the
steam brush is used.
Close supervision is necessary for any
appliance being used by or near children.
Do not leave steam brush unattended while
connected or on an ironing board.
Burns can occur from touching hot metal
parts, hot water, or steam. Use caution when
you turn a steam brush upside down – there
may be hot water in the reservoir.
If the malfunction indicator goes on,
the atiron is not operating normally.
Disconnect from the power supply and have
the atiron serviced by qualied service
personnel.
The steam brush must be used and rested on
a stable surface.
When placing the steam brush on its stand,
ensure that the surface on which the stand is
placed is stable.
The steam brush is not to be used if it has
been dropped, if there are visible signs of
damage or if it is leaking.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
This product has been designed for indoor,
domestic use only. Any commercial use,
inappropriate use or failure to comply with
the instructions, the manufacturer accepts
no responsibility and the guarantee will not
apply.
Always plug your appliance:
- into a mains circuit with voltage
AC 220-240 V.
- into an earthed electrical socket.
Connecting to the wrong voltage may cause
irreparable damage to the appliance and will
invalidate your guarantee.
Completely unwind the power cord before
plugging into an earthed socket.
To reduce the risk of contact with hot water
emitting from steam vents, check appliance
before each use by holding it away from
body and operating steam button.
Never pull on the cord to disconnect the
appliance from electrical outlet; instead,
grasp plug and pull to disconnect on the
plug to disconnect the appliance.
Care should be taken when using the
appliance due to the emission of steam.
Do not direct steam at people, animals or
clothes while they are being worn.
The use of accessory attachments other
than those provided by factory is not
recommended and may result in re, electric
shock or personal injury.
Check the electrical power cord for sign and
wear or damage prior to use. If he electrical
power cord is damaged, it must be replaced
at an approved service centre to avoid any
danger.
SPECIAL INSTRUCTIONS
1. This model needs to wait for the pilot light
to go o before turning on the steam button
for the rst time to prevent water from
vaporizing.
2. If an extension cord is absolutely necessary,
a 10-ampere cord should be used. Cords
rated for less amperage may overheat. Care
should be taken to arrange the cord so that
it cannot be pulled or tripped over.
SAVE THESE INSTRUCTIONS
PLEASE NOTE!
Do not use chemical additive, scented
substances or decalciers. Failure to comply with
the above-mentioned regulations leads to the
loss of guarantee.
PRODUCT DESCRIPTION: [Fig. A]
1. brush cloth
2. brush lining
3. brush
4. broom head
5. burst button
6. steam button lock
7. handle
8. water tank
9. water cover
10. a cover
11. pilot light
12. brush head left/ right
13. brush head lock push button
14. handle cover
15. bushings
16. Ornament
GENERAL INSTRUCTIONS
When using the steam brush for the rst time, you
may notice a slight emission of smoke and hear
some sounds made by the expanding plastics.
This is quite normal and it stops after a short time.
We also recommend passing the iron over an
ordinary cloth before using it for the rst time.
FILLING WITH WATER [Fig. B]
Remove the mains plug from the wall socket
before lling (or emptying) the steam brush with
water.
a) Remove the water tank with two hands at
the direction of arrow showed above.
b) Pull up and Remove the water inlet stopper
WHAT KIND OF WATER SHOULD I USE?
Your appliance was designed to operate
using pure distilled water.
However, it is necessary to periodically
clean the appliance to remove any mineral
deposits.
Do not use untreated tap water, water
from clothes dryers, scented or softened
water, rain water, ltered, bottled or boiled
water, water from refrigerators, batteries
or air conditioners as these may damage
the appliance. These types of water contain
organic waste, mineral elements that
become concentrated when heated and
cause spitting, brown staining, leaking or
premature wear on your appliance. If your
water is very hard, mix 50% untreated tap
water with 50% distilled water (available in
hardware stores).
Fill the water tank with a maximum of 320 ml
of water
c) Close the water inlet stopper.
Return the water tank to its place on the
appliance then plug it in.
Tips: Check the fabric’s label for
recommendations.
We recommended that you test acrylic, nylon or
other synthetic fabrics in an inconspicuous area
to ensure these fabrics are not damaged by hot
steam.
As steam is very hot: never attempt to remove
creases from a garment while it is being worn,
always hang garments on a clothes hanger.
Hang your garment on a clothes hanger.
The fabric brush opens the weaves of the fabrics
for better steam penetration. Before removing
or attaching the steam brush, unplug your
appliance and allow it to cool down.
During use or while unit is heating or cooling do
not rest appliance on its head. Place the product
on a stable, heat resistant, at surface, as the
head will be hot. As the appliance heats, the
housing becomes warm. This is normal.
Plug-in the appliance, the light is turned on. Wait
until the light turn o, the appliance is ready to
use.
Press the steam button with the steam brush
facing away from you holding it in a vertical
position
For optimal use, pass the steam jets over your
garment from top to bottom.
Unplug the appliance
Wait for an hour for your appliance to cool
before storing
Tip: During use or while the unit is heating or
cooling, place the product on a at stable and
heat-resistant place.
After use it, please remove the water tank,
empty the water tank completely, then return
the water tank to its place on the appliance.
SPECIFICATIONS
220-240 V • 50-60 Hz • 1200 W
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local
regulations: hand in the non-working electrical
equipments to an appropriate waste disposal
center.
ENGLISH
ENGLISH
Λήψη εγχειριδίου στα ελληνικά (PDF, 0.38 MB)
(Σκεφτείτε το περιβάλλον και εκτυπώστε αυτό το εγχειρίδιο μόνο εάν είναι πραγματικά απαραίτητο)

Loading…

Βαθμολογία

Πείτε μας τη γνώμη σας για το First Austria FA-5647-1 Ατμοσίδερο βαθμολογώντας ένα προϊόν. Θέλετε να μοιραστείτε τις εμπειρίες σας με αυτό το προϊόν ή να θέσετε μια ερώτηση; Αφήστε ένα σχόλιο στο κάτω μέρος της σελίδας.
Είστε ικανοποιημένοι με το First Austria FA-5647-1 Ατμοσίδερο?
Ναι Όχι
Γίνε ο πρώτος που θα βαθμολογήσει αυτό το προϊόν
0 ψήφοι

Λάβετε μέρος στη συζήτηση σχετικά με αυτό το προϊόν

Εδώ μπορείτε να μοιραστείτε τη γνώμη σας για το First Austria FA-5647-1 Ατμοσίδερο. Εάν έχετε κάποια ερώτηση, διαβάστε πρώτα προσεκτικά το εγχειρίδιο. Το να ζητήσετε ένα εγχειρίδιο μπορεί να γίνει χρησιμοποιώντας τη φόρμα επικοινωνίας μας.

Περισσότερα για αυτό το εγχειρίδιο

Κατανοούμε ότι είναι ωραίο να έχετε ένα χάρτινο εγχειρίδιο για το First Austria FA-5647-1 Ατμοσίδερο σας. Μπορείτε πάντα να κατεβάσετε το εγχειρίδιο από τον ιστότοπό μας και να το εκτυπώσετε μόνοι σας. Εάν θέλετε να έχετε ένα πρωτότυπο εγχειρίδιο, σας συνιστούμε να επικοινωνήσετε με το First Austria. Μπορεί να είναι σε θέση να παρέχουν ένα πρωτότυπο εγχειρίδιο. Αναζητάτε το εγχειρίδιο του First Austria FA-5647-1 Ατμοσίδερο σας σε διαφορετική γλώσσα; Επιλέξτε τη γλώσσα που προτιμάτε στην αρχική μας σελίδα και αναζητήστε τον αριθμό μοντέλου για να δείτε αν τον έχουμε διαθέσιμο.

Προδιαγραφές

Μάρκα First Austria
Μοντέλο FA-5647-1
Κατηγορία Ατμοσίδερα
Τύπος αρχείου PDF
Μέγεθος αρχείου 0.38 MB

Όλα τα εγχειρίδια για First Austria Ατμοσίδερα
Περισσότερα εγχειρίδια του Ατμοσίδερα

Εγχειρίδιο First Austria FA-5647-1 Ατμοσίδερο

Σχετικά προϊόντα

Σχετικές κατηγορίες