EN
3
Ferm
HYDRAULIC JACK
The numbers in the following text refer to the
picture on page 2
For your own safety and that of others, we
recommend that you read this instruction
manual carefully before using this
machine. Keep this instruction manual
and the documentation provided with the
saw for future reference.
Know your apparatus
Before attempting to operate the apparatus,
familiarise yourself with the controls and make
sure you know how to stop it quickly in an
emergency.
Contents
1. Safety instructions
2. Using the apparatus
3. Service & maintenance
Technical specifications
Fig. 1
Lpa Sound pressure level <70dB(A)
1. Safety instructions
Explanation of the symbols
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Special safety rules
Non-observance of the following instructions can
cause personal injuries and/or damage to the
vehicle.
• Beforejackingupthecar,makesurethejack
is as near to the wheel to be lifted as possible
and as far under the body or any other point of
support as possible.
• Themaximumloadindicatedonthejackmust
neverbeexceeded.
• Thejackmustbeusedasaliftingdeviceonly.
• Alwaysplacethejackonahardandlevel
surface.
• Alwaysprotectthecarfromrollingaway.
Before jack ing up the car, place chocks behind
and in front of the wheels remaining on the
ground, if necessary. Put the car in first gear or
put on the handbrake to further block the car.
• Makesuretoplacethejackinsuchawaythat
your hand is not underneath the car when
jacking it up.
• Makesurethejackisplacedvertical.
• Foryourownsafety,beforeworkingor
crawling underneath the car jack up the car
and support the shafts.
• Beforeusingtheshaftsupportsmakesure
they are in good condition.
• Shouldthepressureinthejackbecometoo
high,excessairwillescapethroughtherelief
valve.Thereliefvalvehasbeensetinthe
factory.
2. Using the apparatus
Assembling the jacking beam
Telescopebothpartsofthejackingbeam,allowing
the flat side to be used when opening and closing
the cock to lower the jack.
Lifting
• Putthecarin‘1’orengagethehandbrake
and block the wheels to prevent the car from
moving.
• Closethecockbymeansofthejackingbeam.
• Instalthescrewjackintherightplace
(indicated by the car manufacturer).
• Insertthejackingbeamintothejackingpoint
and move the jacking beam up and down.
Shaft supports
• Afterjackingupthecartheshaftsupports
should be installed.
• Lowerthecarbyturningthethescrewofthe
release valve anticlockwise, until the car rests
on the supports. Never work under a car which
only rests on the trolley jack.
Lowering
Fig. 1
When you have finished the job, jack up the car
until the jack stands are free. Remove the jack
stands. Using the jacking beam, very slowly and
counterclockwise open the cock referred to under
A.
3. Service & maintenance
Regular maintenance of the hydraulic
jack prevents unnecessary problems.
Λάβετε μέρος στη συζήτηση σχετικά με αυτό το προϊόν
Εδώ μπορείτε να μοιραστείτε τη γνώμη σας για το FERM JBM1001 Γρύλος. Εάν έχετε κάποια ερώτηση, διαβάστε πρώτα προσεκτικά το εγχειρίδιο. Το να ζητήσετε ένα εγχειρίδιο μπορεί να γίνει χρησιμοποιώντας τη φόρμα επικοινωνίας μας.