. ,
.
TSS :
TSS : ( )
§ ,
2-3 ( "" ).
,
.
TSS
(+)
,
.
. . (§)
, (
) ( BB)
Ferm 93
High pressure cleaner
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2-3
INTRODUCTION
The high pressure cleaner you have purchased is a
technologically advanced product designed by one of the
leading European manufacturers of high pressure
pumps. To obtain the best performance from your unit,
read this booklet carefully and follow the instructions
each time you use the cleaner. We congratulate you on
your choice and wish you successful operation.
INTENDED USE
- The cleaner is intended only for the cleaning of
vehicles, machines, boats, buildings, etc., by the
removal of stubborn dirt using clean water and
chemical detergents.
- When using chemical detergents, only use
biodegradable types.
- We recommend HOBBY - FOAM detergent
(# 3206).
- Only clean vehicle engines in areas in which suitable
oil traps are installed.
TECHNICAL DATA
PRODUCT INFORMATION
Fig. 2.
a Water outlet (OULET)
b Water inlet with filter (INLET)
c High pressure rotating nozzle kit
(optional accessory)
d Adjustable spray nozzle
e Use • Maintenance handbook
f Power supply cable with plug
g Lance
h Gun with safety catch
i High pressure hose
m Nozzle cleaning tool
n Motor switch
p Adjustable foam unit
SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
ELECTRICAL SAFETY
Always check if your mains voltage corresponds
with the value on the type plate.
When replacing old cables or plugs
Throw away old cables or plugs immediately as soon as
new ones have replaced these. It is dangerous to put the
plug of a loose cable into the socket outlet.
When using extension cables
Only use an approved extension cable that is suitable for
the machine’s power. The cores must have a diameter of
at least 1.5 mm
2
. When the extension cable is on a reel,
unroll the cable in its entirety.
SWITCH OFF THE MACHINE IMMEDIATELY
IN CASE OF
1. Malfunction in the mains plug, power cable or
damaging of cable.
2. Broken switch.
3. Smoke or stench of scorched insulation.
SPECIFIC SAFETY RULES
The USE and MAINTENANCE manual constitutes an
essential part of the cleaner equipment and should be
kept in a safe place for future reference. If you sell the
cleaner, the manual should be handed on to the new
owner.
- Before starting the cleaner, make sure that it is
receiving water correctly. Operating the cleaner
without water could damage the seals.
- Do not disconnect the plug by pulling on the
electrical cable.
- If you are too far from the object you wish to clean,
do not move the cleaner nearer by pulling on the high
pressure hose; use the handle provided.
Voltage | 230 V~
Frequency | 50 Hz
Power consumption | 1500 W
Maximum pressure | 110 Bar
L
wa
(sound capacity) | 82.7 dB(A)
Λάβετε μέρος στη συζήτηση σχετικά με αυτό το προϊόν
Εδώ μπορείτε να μοιραστείτε τη γνώμη σας για το FERM GRM1004 Πλυντήριο πίεσης. Εάν έχετε κάποια ερώτηση, διαβάστε πρώτα προσεκτικά το εγχειρίδιο. Το να ζητήσετε ένα εγχειρίδιο μπορεί να γίνει χρησιμοποιώντας τη φόρμα επικοινωνίας μας.