Εγχειρίδιο Dolmar ES-184 TLC Αλυσοπρίονο

Εγχειρίδιο

17

Maintaining the chain and run-down

brakes

The braking systems are very important safety features.

Like any other component of the chain saw, they are

subject to a certain degree of wear. They must be

inspected regularly by DOLMAR authorized service

centers. This measure is for your own safety.

Replacing carbon brushes

Remove and check the carbon brushes regularly. Replace

when they wear down to the limit mark. Keep the carbon

brushes clean and free to slip in the holders. Both carbon

brushes should be replaced at the same time. Use only

identical carbon brushes. (Fig. 44)

Use a screwdriver to remove the brush holder caps. Take

out the worn carbon brushes, insert the new ones and

secure the brush holder caps.

After replacing brushes, plug in the tool and break in

brushes by running tool with no load for about 10 minutes.

(Fig. 45)

Storing tool

Biologically degradable saw chain oil can only be kept for

a limited period. Beyond two years after manufacture,

biological oils begin to acquire an adhesive quality, and

cause damage to the oil pump and components in the

lubricating system.

– Before taking the chain saw out of service for a longer

period, empty the oil tank and fill it with a small quantity

of engine oil (SAE 30).

– Run the chain saw briefly to flush all residue of the

biological oil out of the tank, lubricating system and

saw mechanism.

NOTE:

• When the chain saw is taken out of service, small

quantities of chain oil leaks from it for some time

afterwards. This is normal, and is not a sign of a fault.

Store the chain saw on a suitable surface.

Before returning the chain saw to service, fill up with fresh

BIOTOP saw chain oil.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by DOLMAR Authorized Service Centers,

always using DOLMAR replacement parts.

TROUBLE SHOOTING

Before asking for repairs, conduct your own inspection

first. If you find a problem that is not explained in the

manual, do not attempt to dismantle the tool. Instead, ask

Dolmar Authorized Service Centers.

014314

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Dolmar tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Dolmar Service Center.

• Saw chain

• Guide bar cover

• Guide bar

• Saw chain oil

NOTE:

• Some items in the list may be included in the tool

package as standard accessories. They may differ

from country to country.

Noise

ENG905-1

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA

): 90.8 dB (A)

Sound power level (L

WA

): 101.8 dB (A)

Uncertainty (K): 2.5 dB (A)

Wear ear protection.

Malfunction status Possible cause Remedy

The chain saw does not start.

No power supply.

Connect to the power supply.

Check the power supply.

Cable defective.

Stop using the tool immediately, and ask your local

authorized service center.

Tool malfunction.

Stop using the tool immediately, and ask your local

authorized service center.

Chain does not run. Chain brake is engaged. Release chain brake.

Insufficient performance. Carbon brush worn down. Ask your local authorized service center for repair.

No oil on the chain.

Oil tank is empty. Fill the oil tank.

Oil guide groove is dirty. Clean the groove.

Oil pump adjusting screw

incorrectly adjusted.

Adjust the oil pump feed rate.

Chain does not stop even the

chain brake is engaged.

Brake band worn down.

Stop using the tool immediately, and ask your local

authorized service center.

The tool vibrates abnormally.

Loose guide bar or saw chain. Adjust the guide bar and saw chain tension.

Tool malfunction.

Stop using the tool immediately, and ask your local

authorized service center.

Βαθμολογία

Περισσότερα για αυτό το εγχειρίδιο

Κατανοούμε ότι είναι ωραίο να έχετε ένα χάρτινο εγχειρίδιο για το Dolmar ES-184 TLC Αλυσοπρίονο σας. Μπορείτε πάντα να κατεβάσετε το εγχειρίδιο από τον ιστότοπό μας και να το εκτυπώσετε μόνοι σας. Εάν θέλετε να έχετε ένα πρωτότυπο εγχειρίδιο, σας συνιστούμε να επικοινωνήσετε με το Dolmar. Μπορεί να είναι σε θέση να παρέχουν ένα πρωτότυπο εγχειρίδιο. Αναζητάτε το εγχειρίδιο του Dolmar ES-184 TLC Αλυσοπρίονο σας σε διαφορετική γλώσσα; Επιλέξτε τη γλώσσα που προτιμάτε στην αρχική μας σελίδα και αναζητήστε τον αριθμό μοντέλου για να δείτε αν τον έχουμε διαθέσιμο.

Προδιαγραφές

Όλα τα εγχειρίδια για Dolmar Αλυσοπρίονα
Περισσότερα εγχειρίδια του Αλυσοπρίονα

Συχνές ερωτήσεις σχετικά με Dolmar ES-184 TLC Αλυσοπρίονο

Η ομάδα υποστήριξής μας αναζητά χρήσιμες πληροφορίες προϊόντος και απαντήσεις σε συχνές ερωτήσεις. Εάν εντοπίσετε ανακρίβεια στις συνήθεις ερωτήσεις μας, ενημερώστε μας χρησιμοποιώντας τη φόρμα επικοινωνίας.

Σχετικά προϊόντα

Εγχειρίδιο

Dolmar PS-220 TH Αλυσοπρίονο

Εγχειρίδιο

Dolmar PS-222 TH Αλυσοπρίονο

Εγχειρίδιο

Dolmar PS-311TH Αλυσοπρίονο

Εγχειρίδιο

Dolmar ES-2131 TLC Αλυσοπρίονο

Εγχειρίδιο

Dolmar PS-352 TLC-40 Αλυσοπρίονο

Εγχειρίδιο

Dolmar AS-3625LGE Αλυσοπρίονο

Εγχειρίδιο

Dolmar AS1812LGE Αλυσοπρίονο

Εγχειρίδιο

Dolmar ES-2136 TLC Αλυσοπρίονο

Σχετικές κατηγορίες