4
- Use clamps or a vise to secure the object to be worked in
place. The work will be safer if both hands are free to con-
trol the tool.
- Before using the appliance check the disc / tool dimensions
are compatible for this appliance.
- Do not touch any of the appliance’s moving parts while it
is operating.
- Do not grind any material containing asbestos. Working with
asbestos and/or silica wheel, the dust produced is harmful for
health. Prevent inhalation of these types of dust by following
the appropriate health and safety regulations.
- Protect yourself from contact with and the inhalation of dust
created by sanding wood and metal surfaces and surfaces
coated with lead paint. Use protective equipment that com-
plies with the appropriate health and safety regulations.
- Exercise precaution after employing the stop operation on
the appliance as the tool will continue moving from the effect
of its own mechanical inertia.
Power tool use and care
- Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
- Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired
- Disconnect the plug from the power source and/or the
battery pack from the power tool before making any ad-
justments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting
the power tool accidentally.
- Store idle power tool out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dan-
gerous in the hands of untrained users
- Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other con-
dition that may affect the power tool’s operation. If dam-
aged, have the power tool repaired before use. Many acci-
dents are caused by poorly maintained power tools
- Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier to control
Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account the
working conditions and the work to be performed. Use of
the power tool for operations different from those intended
could result in a hazardous situation.
- Fully unroll the appliance’s power cable before each use.
- Do not use the appliance if its accessories are not properly
tted.
ed with this power tool. Failure to follow all instructions listed
below may result in electric shock, re and/or serious injury.
- This power tool is not recommended for polishing.
Operations for which the power tool was not designed may
create a hazard and cause personal injury.
- Do not use accessories which are not specically de-
signed and recommended by the tool manufacturer.
Just because the accessory can be attached to your power
tool, it does not assure safe operation.
- The rated speed of the accessory must be at least equal
to the maximum speed marked on the power tool. Acces-
sories running faster than their rated speed can break and y
apart.
- The outside diameter and the thickness of your acces-
sory must be within the capacity rating of your power tool.
Incorrectly sized accessories cannot be adequately guarded
or controlled.
- The arbor size of wheels, anges, backing pads or any
other accessory must properly t the spindle of the pow-
er tool. Accessories with arbor holes that do not match the
mounting hardware of the power tool will run out of balance,
vibrate excessively and may cause loss of control.
- Do not use a damaged accessory. Before each use in-
spect the accessory such as abrasive wheels for chips
and cracks, backing pad for cracks, tear or excess wear,
wire brush for loose or cracked wires. If power tool or ac-
cessory is dropped, inspect for damage or install an un-
damaged accessory. After inspecting and installing an ac-
cessory, position yourself and bystanders away from the
plane of the rotating accessory and run the power tool at
maximum no-load speed for one minute. Damaged acces-
sories will normally break apart during this test time.
- Wear personal protective equipment. Depending on ap-
plication, use face shield, safety goggles or safety glass-
es. As appropriate, wear dust mask, hearing protectors,
gloves and workshop apron capable of stopping small
abrasive or workpiece fragments. The eye protection must
be capable of stopping ying debris generated by various op-
erations. The dust mask or respirator must be capable of ltrat-
ing particles generated by your operation. Prolonged exposure
to high intensity noise may cause hearing loss.
- Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal pro-
tective equipment. Fragments of workpiece or of a broken
accessory may y away and cause injury beyond immediate
area of operation.
- Hold the power tool by insulated gripping surfaces only,
when performing an operation where the cutting acces-
sory may contact hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an
electric shock.
- Position the cord clear of the spinning accessory. If you
- Do not use the appliance if the accessories or consumables
attached to it are defective. Replace them immediately.
- Use the appliance handle/s, to catch it or move it.
- This appliance is for professional use.
- This appliance is not a toy. Children should be supervised to
ensure that they do not play with the appliance.
- Do not expose the appliance to extreme temperatures.
- Do not use separator or reducing bushings, adapters to x
the discs / tools they are not directly compatible with the ap-
pliance.
- Let the appliance running with no load for 30 seconds in a
safe position. If you notice serious vibration or other defects
stop the appliance immediately. Then check the problem and
/or proceed as we describe on Anomalies and Repair clause.
- Do not operate the angle grinder without the auxiliary handle.
- Always check the workpiece before operation and remove
any obstructions such as nails, staples, screws, string, rags,
cloths and other debris.
- Check the position of power cables before commencing work
ensuring they are well away from the work area.
- When using the angle grinder make sure that the workpiece
is securely clamped to a work bench or vice.
- Before cutting ensure there is a suitable gap below the work-
piece to prevent the disc from touching any obstacles.
- Allow the angle grinder to reach it’s optimum speed before
commencing work
- Not recommended for use in conjunction with a cut-off stand.
- Keep hands and other body parts well away from the work
area whist the tool is in use.
- Keep hands and other body parts well away from the discs
while the angle grinder is in use. Do not attempt to remove cut
material whilst the angle grinder is in operation or reach under-
neath for any reason.
- Do not touch the grinding disc after operation. The bit will be
HOT and will burn!
Service
- Have your power tool serviced by a qualied repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained
Any misuse or failure to follow the instructions for use renders
the guarantee and the manufacturer’s liability null and void.
Safety Warnings for Angle Grinder
Safety Warnings Common for Grinding, Sanding, Wire
Brushing, or Abrasive
Cutting-Off Operations
- This power tool is intended to function as a grinder,
sander, wire brush or cut-off tool. Read all safety warn-
ings, instructions, illustrations and specications provid-
Λάβετε μέρος στη συζήτηση σχετικά με αυτό το προϊόν
Εδώ μπορείτε να μοιραστείτε τη γνώμη σας για το Casals CAG90/115 Γωνιακός τροχός. Εάν έχετε κάποια ερώτηση, διαβάστε πρώτα προσεκτικά το εγχειρίδιο. Το να ζητήσετε ένα εγχειρίδιο μπορεί να γίνει χρησιμοποιώντας τη φόρμα επικοινωνίας μας.