DESCRIPTION OF THE DEVICE
1 Window 2 Cover
3 Switch On/OFF 4 Air outlet
5 Air inlet 6 Power Cord
7 The water outlet valve 8 ice storage container
9 Cooling chamber 10 ice production chamber
11 Spatula
USE
Ice cubes from first production should be thrown away.
1. Connect the device to the mains. Do not turn it on for 120 minutes, if it was previously moved.
2. Open the cover (2) and remove the ice cotainer (8).
3. Fill in the water tank (below the ice container) with room temperature water, so that it does not exceed the MAX mark.
4. Insert the ice container (8) in right place and close the cover (2).
5. Press the switch (3). The unit will start producing ice. Do not open the cover (2). The process takes approx. 10 minutes.
6. To stop or pause the production of ice, press the switch (3). Before restarting the machine, wait at least 3 minutes.
7. The light ADD WATER indicates that the water tank is almost empty. The unit turns off automatically. Then you should open the lid (2),
remove the ice container (8) and add water into the water tank (below the ice container). Then place the container (8) in correct place,
close the cover (2) and press the switch (3).
8. The light ICE FULL indicates that the ice container (8) is full. You should then remove all the cubes from the container (8). If both
ofabove lights shine ice container (8) is in the wrong position.
9. The light WORK flashes when the device is plugged in and lights continuously when the device is working.
10. To turn off the lights (erase errors), press the switch (3).
11. When device used all of water leave the cover (2) open so the interior of device can get dry. If in the device is still some water it must
be disposed of in accordance with clause CLEANING.
CLEANING
1. Before cleaning, unplug the power cord.
2. Do not immerse the device in water.
3. Do not use caustic or abrasive cleaners.
4. Clean ice container (8) with mild detergent under running warm water.
5. Housing and the inside of the device wipe with a mix of water and vinegar.
6. If the unit is not used for a long time, drain the last of the water. Place container under the water outlet valve (7). Turn the valve
counterclockwise. Water will flow. After the release of water close the valve (7).
TECHNICAL DATA
Voltage: 220-240V ~ 50Hz
Input power: 0.8A
Production of ice cubes: 12kg / 24 hours.
Noise emission <70dB
Capacity of water tank: approx. 2.2 liters
Refrigerant: R600a / 24g
Foaming gas: C5H10
Climate class: N
4
DEUTSCH
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should
be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in
the common waste bin.
DEUTSCH
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund von
bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
Λάβετε μέρος στη συζήτηση σχετικά με αυτό το προϊόν
Εδώ μπορείτε να μοιραστείτε τη γνώμη σας για το Camry CR 8073 Παγομηχανή. Εάν έχετε κάποια ερώτηση, διαβάστε πρώτα προσεκτικά το εγχειρίδιο. Το να ζητήσετε ένα εγχειρίδιο μπορεί να γίνει χρησιμοποιώντας τη φόρμα επικοινωνίας μας.
απάντηση | Αυτό ήταν χρήσιμο (6) (Μεταφράστηκε από την Google)
απάντηση | Αυτό ήταν χρήσιμο (0) (Μεταφράστηκε από την Google)