Εγχειρίδιο Black and Decker XT2030 Σίδερο

Εγχειρίδιο

4

ENGLISH

u Hold the appliance at an angle as shown.

u Fill the appliance with water using the beaker provided.

u Close the water tank cover.

Warning! Never ll above the maximum lling level (11).

Normal tap water can be used, but if you live in a hard water

area the use of distilled water is recommended. Do not use

chemically descaled water.

Use

Warning! Do not leave the appliance unattended while it is

connected to the power supply and during the cool down period.

Temperature setting

The required temperature setting depends on the garment

fabric.

u Adjust the temperature control dial (1) to the required

setting:

- • Synthetics

- •• Silk/wool

- ••• Cotton/Linen

If you are unsure of the bre content of a garment, start with a low

temperature setting and test on a small area (seam or inside hem).

If wrinkles remain, gradually increase the heat setting until you nd

the optimum setting.

Using as a dry iron

u Stand the appliance on its heel rest (13).

u Plug the appliance in and switch on.

u Set the steam control dial (4) to the no steam position (g. B).

u Adjust the temperature control dial (1) to the required setting.

The heating light (2) will switch off when the appliance has

reached the required temperature.

Using as a steam iron

u Fill the water tank as described above.

u Stand the appliance on its heel rest (13).

u Adjust the temperature control dial (1) to the required

steam setting.

The heating light (2) will switch on. When the heating light

switches off, the iron will be ready for use as a steam iron. The

heating light will regularly switch on and off whilst ironing.

u To create steam, set the steam control dial (4) to the

required steam position.

u Plug the appliance in and switch on.

Using the steam burst button

The steam burst feature can only be used whilst ironing on a

high temperature setting.

u Make sure that there is water in the tank and the

temperature control dial (1) is set to the steam position.

u Lift the appliance and press the steam burst button (5).

You may need to press a few times to activate the pump.

u Let the appliance cool down before leaving it unattended and

before cleaning or inspecting any parts of the appliance.

u The power supply cord should not touch the hot soleplate

during use or during the cool down period.

u Do not touch the soleplate until it has cooled down.

u Wait until the appliance has cooled down before emptying

the water tank as the water may still be hot.

u Do not immerse the appliance, cored set or plug in liquids

u Always disconnect the appliance from the supply before

lling, emptying, cleaning, or carrying out any

maintenance on the appliance.

u The plug must be removed from the socket-outlet before

the water reservoir is lled with water

u The iron must be used and rested on a stable surface

u The iron is not to be used if it has been dropped, if there

are visible signs of damage or if it is leaking.

Features

1. Temperature control dial

2. Heating light

3. Self-clean button

4. Steam control dial

5. Steam burst button

6. Spray button

7. Water tank cover

8. Spray nozzle

9. Soleplate

10. Water tank

11. Maximum lling level indicator

12. Cord storage

13. Heel rest

Beforerstuse

Cleaning the soleplate

u Make sure that the appliance is unplugged.

u Fill the appliance with water as described below.

u Use the self-clean system as described below. When

nished, wipe the soleplate and steam vents with a cloth.

Some parts of the appliance have been lightly greased and as

a result the appliance may smoke slightly when switched on

for the rst time. This will cease after a short while.

Assembly

Warning! Before assembly, make sure that the appliance is

switched off and unplugged.

Fillingthewatertank(g.A&B)

In order to be able to use the steam function or the spray

feature, you will rst need to ll the water tank with water.

u Make sure that the appliance is unplugged.

u Set the steam control dial (4) to the no steam position (g. B).

u Open the water tank cover (7).

Βαθμολογία

Περισσότερα για αυτό το εγχειρίδιο

Κατανοούμε ότι είναι ωραίο να έχετε ένα χάρτινο εγχειρίδιο για το Black and Decker XT2030 Σίδερο σας. Μπορείτε πάντα να κατεβάσετε το εγχειρίδιο από τον ιστότοπό μας και να το εκτυπώσετε μόνοι σας. Εάν θέλετε να έχετε ένα πρωτότυπο εγχειρίδιο, σας συνιστούμε να επικοινωνήσετε με το Black and Decker. Μπορεί να είναι σε θέση να παρέχουν ένα πρωτότυπο εγχειρίδιο. Αναζητάτε το εγχειρίδιο του Black and Decker XT2030 Σίδερο σας σε διαφορετική γλώσσα; Επιλέξτε τη γλώσσα που προτιμάτε στην αρχική μας σελίδα και αναζητήστε τον αριθμό μοντέλου για να δείτε αν τον έχουμε διαθέσιμο.

Προδιαγραφές

Όλα τα εγχειρίδια για Black and Decker Σίδερα
Περισσότερα εγχειρίδια του Σίδερα

Συχνές ερωτήσεις σχετικά με Black and Decker XT2030 Σίδερο

Η ομάδα υποστήριξής μας αναζητά χρήσιμες πληροφορίες προϊόντος και απαντήσεις σε συχνές ερωτήσεις. Εάν εντοπίσετε ανακρίβεια στις συνήθεις ερωτήσεις μας, ενημερώστε μας χρησιμοποιώντας τη φόρμα επικοινωνίας.

Σχετικά προϊόντα

Εγχειρίδιο

Black and Decker XT2200CP Σίδερο

Εγχειρίδιο

Black and Decker BR950 Σίδερο

Εγχειρίδιο

Black and Decker XT2040 Σίδερο

Εγχειρίδιο

Black and Decker XT2200 Σίδερο

Εγχειρίδιο

Taurus Hydra 2600 Σίδερο

Εγχειρίδιο

Tefal SV6112E1 Σίδερο

Εγχειρίδιο

Singer SGR 18300 Σίδερο

Εγχειρίδιο

Philips DST7060 Σίδερο

Σχετικές κατηγορίες