Εγχειρίδιο Alphamed UFR106 Θερμόμετρο

Εγχειρίδιο

Instruction manual

Infrared Forehead

Thermometer

WARNING: This alert identifies hazards that may cause serious personal

injury or death.

CAUTION: This alert identifies hazards that may causeminor personal injury,

product damage, or property damage.

Type BF applied part

Manufacturer

SN Specifies serial number

DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection

of such waste separately for special treatment is necessary.

Direct current

Follow instructions for use

CAUTION: Consult accompanying documents

-Body

1. Auto-sense Probe

2. 2-Color LED

3. Display Screen

4.

SET

Button

5. MEM Button

6. START/STOP Button

7. Battery Cover

3. Sound switch setting:

Enter the sound switch setting mode, or is displayed on the screen and

flashes, press SET Button to select and press START/STOP Button to confirm

selection.

Proper Use Of The Unit

Pre-measurement

About Normal Body Temperature&Fever

The temperature in the forehead and temple area differs from the internal

temperature, which is taken orally or rectally. Vasoconstriction, an effect which

constricts the blood vessels and cools the skin, can occur during the early stages

of a fever.In this case, the temperature measured by the Infrared thermometer

may be unusually low. If the measurement therefore does not match the patient's

own perception or is unusually low, re peat the measurement every 15 minutes.

Introduction

▲Your new Infrared forehead thermometer uses advanced infrared (IR) technol-

ogy to measure temperature instantly and accurately on the forehead or object.

▲Easy to use and less measurement time

This thermometer does not need to contact body or object to ensure the safety

and hygiene. Its ergonomic design makes this thermometer be simple and very

easy to check the temperature. It only takes 1 second to take measurement and

reading.

▲Body and object modes

This thermometer supports to measure temperature of body and object. Measur-

ing range of object mode is 0.0 to 100.0°C (32.0°F~199.9°F ). That means except

to take body temperature, it also supports to take the surface temperature of

object as below,

Surface temperature of milk in the bottle;

Surface temperature of baby bath;

Environment temperature.

▲Color visible indication of alarm and alarm sounds

When body temperature is over 37.5°C, color indicator will show red color and an

alarm sounds for 10 times.

▲Memory function

It stores up to 20 sets recent measurement data.

▲Auto power off

Automatically power off if left idle for Approx 60s.

▲Measurement

Measurement time interval in 1 second and the measurement distance is within

1~3cm.

Please read the manual carefully before you use the unit, and keep for future

reference.

▲Intended use :

The Infrared Thermometer is intended for the intermittent measurement and

monitoring of human body temperature from forehead or object. The device is

indicated for use by people of all ages at homecare and in hospital.

Safety Information

To assure the correct use of the product, basic safety measures should always

be followed including the warning and the caution listed in the instruction

manual :

This thermometer is not intended to substitute for a consultation with your

physician.The forehead scan temperature serves as a reference only. It

cannot be a judgment on fever.

Basic safety precautions should always be observed, especially when the

thermometer is used on or near children and disabled persons.

Please place the device unreachable by young.

Avoid direct sunlight.

Do not touch the lens.

No modification of this device is allowed.

The swallowing of small parks like packing bag, battery,battery cover and so

on may cause the suffocation. .

Please do not use a dilution agent, alcohol or petrol to clean the unit. Please

treat is gently and prevent the falling from a high place.

Please do not immersed it in liquid.

Never leave battery in the battery compartment for a long time without use, as

they may leak and cause damage to the unit.

Please take off the battery if you do not intend to use within 3 months. Replace

with new batteries if the unit display a low battery symbol.

Do not mix the old and new batteries together.

Do not use during the transportation.

WARNING:

Do not dispose of electrical appliances as unsorted municipal waste, use

separate collection facillities.Contact you local government for information

regarding the collection systems available. If electrical appliances are

disposed of in landfills or dumps, hazardous substances can leak into the

groundwater and get into the food chain, damaging your health and well-be-

ing.

Classification

1. Internally powered equipment;

2. Type BF applied part; .

3. Protection against ingress of water or Particulate matter: IP21;

4. Not category AP/APG equipment;

5. Mode of operation:Continuous operation.

The user must check that the equipment functions safely and see that it is in proper

working condition before being used.

Product Structure

-Display

Battery Installation

Remove the battery cover from the battery compartment,insert the battery.

1. Remove the battery cover from .the battery compart-

ment as the arrow direction accordingly.

2. Insert 2 AAA powerful batteries into the compartment

and ensure each battery is in the proper direction,

Positive (+) and Negative (-) are displayed on the back

of battery cover.

3. Close the battery cover.

Low battery and replacement

When power on, the low battery symbol

will display once the unit start to

work, and you must replace with new batteries, otherwise the unit can' t work.

Battery type and replacement

Please use 2pcs AAA identical 1. 5V alkaline batteries.

Do not use the batteries beyond their expiry date.

Please remove the batteries if you do not need to use for long time.

WARNING

Dispose of the battery in accordance with all federal, state and local laws. To

avoid fire and explosion hazard, do not burn or incinerate the battery.

Setting Mode

How To Set

1. Mode setting:

Press SET Button when power on after you hear 1 beep, the screen will display

or , Mode will change between and .when the SET Button is pressed.It

will confirm the Body Mode automatically when you switch to , and confirm the

Object Mode automatically when you switch to . Then Mode setting is finished.

Body mode

Object mode

Note: The Body Mode is used to measure the forehead temperature, then the Object Mode

is used to measure the object temperature.

2. Unit setting:

Long press SET Button when power on after you hear 1 beep, the screen will

display or , Mode will change between and .when the SET Button is

pressed.It will confirm the Celsius Unit automatically when you switch to , and

confirm the Fahrenheit Unit automatically when you switch to . Then press

START/STOP Button make the confirmation selection, and after the selection is

completed, it will automatically enter the sound switch setting mode.

Celsius/℃ Fahrenheit/℉

As a reference, you can also measure the internal body temperature using a

conventional oral or rectal thermometer.

Body temperature can vary from one individual/person to next.

It also varies by location on the body and time of day. Below shows the statistical

normal ranges from different sites.

Please keep in mind that temperatures measured from different sites, even at the

same time, should not be directly compared. Fever indicates that the body

temperature is higher than normal. This symptom may be caused by infection,

overdressing or immunization. Some people may not experience fever even

when they are ill.

These include, but are not limited to, infants younger than 3 months old, persons

with compromised immune systems, persons taking antibiotics, steroids or

antipyretics (aspirin,ibuprofen, acetaminophen), or persons with certain chronic

illnesses. Please consult your physician when you feel ill even if you do not have

fever.

Table*1 Body Site Normal Temperature Range

Note:

Body Temperature at WebMD;

website:

http://firstaid.webmd.com/body-temperature;retrieved at 2010 Jan 7.

As a Body Thermometer

1).Press the START/STOP Button, all symbols appear on the

display, you can hear 1 short beep, then unit °C/°F on the

display start to flash.

2).Press the SET Button to select Body Mode ,the temperature

unit flashes.

3).Move the probe close to the forehead make sure the probe

is flat and take measurement with a distance between 1~3cm.

Press the START/STOP Button, The meter will take measure-

ment.

4).The measurement will be finished in 1 second, when it has

been completed you can hear 1 short beeps, in the meantime,

the reading will appears on the display with green LED blinks.

Note:

● If the readingis�37.5°C(99.5°F ), the display will show together with green LED and 1 short

beep.

● If the reading is≥37.5°C(99.5°F)and�43°C(109.4°F), the display will show together with

red LED and 10 short beeps.

● Only after the unit °C/°F start to flash again, it can continue to take measurement.

● As the forehead measurement temperature is likely to be affected by sweat, oil and the

surroundings, the reading shall be taken as a reference only.

● If the probe is placed at an angle close to the forehead measurement, the reading will be

affected by surrounding temperature.

● Babies' skin reacts very quickly in the ambient temperature. Therefore, do not take their

temperature with the non-contact thermometer during/after breastfeeding, because the skin

temperature maybe lower than the internal body temperature.

Symbol descriptions

The following symbols may appear in this manual, on the label,on the device, or on it's

accessories. Some of the symbols represent standards and compliances associated with

the device and its use.

Βαθμολογία

Περισσότερα για αυτό το εγχειρίδιο

Κατανοούμε ότι είναι ωραίο να έχετε ένα χάρτινο εγχειρίδιο για το Alphamed UFR106 Θερμόμετρο σας. Μπορείτε πάντα να κατεβάσετε το εγχειρίδιο από τον ιστότοπό μας και να το εκτυπώσετε μόνοι σας. Εάν θέλετε να έχετε ένα πρωτότυπο εγχειρίδιο, σας συνιστούμε να επικοινωνήσετε με το Alphamed. Μπορεί να είναι σε θέση να παρέχουν ένα πρωτότυπο εγχειρίδιο. Αναζητάτε το εγχειρίδιο του Alphamed UFR106 Θερμόμετρο σας σε διαφορετική γλώσσα; Επιλέξτε τη γλώσσα που προτιμάτε στην αρχική μας σελίδα και αναζητήστε τον αριθμό μοντέλου για να δείτε αν τον έχουμε διαθέσιμο.

Προδιαγραφές

Όλα τα εγχειρίδια για Alphamed Θερμόμετρα
Περισσότερα εγχειρίδια του Θερμόμετρα

Συχνές ερωτήσεις σχετικά με Alphamed UFR106 Θερμόμετρο

Η ομάδα υποστήριξής μας αναζητά χρήσιμες πληροφορίες προϊόντος και απαντήσεις σε συχνές ερωτήσεις. Εάν εντοπίσετε ανακρίβεια στις συνήθεις ερωτήσεις μας, ενημερώστε μας χρησιμοποιώντας τη φόρμα επικοινωνίας.

Σχετικά προϊόντα

Εγχειρίδιο

Philips SCH540 Avent Θερμόμετρο

Εγχειρίδιο

Medisana TM 710 Θερμόμετρο

Εγχειρίδιο

Microlife FR 100 Θερμόμετρο

Εγχειρίδιο

Sanitas SFT 79 Θερμόμετρο

Εγχειρίδιο

Chicco Thermo Distance Θερμόμετρο

Εγχειρίδιο

Medisana TM 760 Θερμόμετρο

Εγχειρίδιο

Medisana TM 750 connect Θερμόμετρο

Εγχειρίδιο

Fysic FT-38 Θερμόμετρο

Σχετικές κατηγορίες